eBay Classifieds » All ads » Jobs » Arch & engineering » 

process engineer in New Hampshire

(1-16 of 16 ads)

View as:
Categories
  1. Sponsored Link 5
  2.  
  1. Process Engineer Intern

    The Engineering Intern shall support the facility and departments in the development, implementation, and maintenance of the quality and engineering systems at the Jaffrey, NH facility. This position will begin in May 2014 and go through the end of August 2014. To assist in researching, writing, and performing Installation Qualification (IQ), Operation Qualification (OQ) & Process Qualification (PQ) validation protocols. Write document changes and modify procedures in accordance with document change ...

  2. Sr. QA Engineer

    Position Description Assure that material procured for ES programs conforms to established reliability, technical and quality requirements. • Provide technical/administrative support to Business Area Quality Assurance in the development of incoming and source inspection instructions. • Plan and determine capabilities of incoming inspection and recommend/ implement new technology, tools, inspection/test equipment. • Participate as the lead member of the dedicated Preliminary Material Review ...

  3. Quality Engineer

    Position Description Quality Assurance Engineering Professional with Hands On direct working experience in Military Defense Electronics Manufacturing environment. Communication skills Customer and DCMA contact BUILD BOOK DOCUMENTATION REVIEW CONFIGURATION VERIFICATION NON CONFORMANCE PROCESS Requirements Review , CCB, FAI, Test Description: verification of product/process conformance and customer satisfaction by providing entry level technical expertise and leadership for executing product ...

  4. Senior EE

    Position Description Senior Pr. Electrical Engineering Strong RF Design Experience for Hardware Sustainment. This engineer will function as a member of the Hardware Design Team working on delivering hardware systems for the Aerospace Industry. A minimum of 10 years experience designing and troubleshooting RF circuits. The successful candidate should demonstrate a track record of delivering designs that are high density, efficient, and cost effective. Skills Required Principal ...

  5. Business Development Manager

    Business Development Manager   Overview KMC Systems, a wholly-owned subsidiary of and co-located with Elbit Systems of America, is a leading contract designer and manufacturer of medical devices and instrumentation for OEM’s in the areas of diagnostic, therapeutic, and biomedical products. With more than 25 years of experience, KMC is an ISO 13485 certified and FDA registered firm with expertise in all aspects of product development, verification, design for and transition to production. ...

  6. Software Configuration Manager

      Position Description  • Establishes and manages tool specific software libraries as required.  • Assembles configured software on designated hardware platforms/media for delivery to customers in accordance with documented procedures.  • Performs and documents software builds to ensure reproducible software configuration baselines.  • Executes release and change control functions using the designated software configuration management system/tools and in accordance with the established Configuration ...

  7. Plastic Medical Devices - Quality Process Engineer - Laconia, NH

    Seeking at least 5 years Quality Process Engineering experience in a manufacturing environment focused on injection molded plastic products to support the development and manufacturing of novel medical devices. Required: *** Managed CAPA system, reported root causes, and developed corrective actions. *** Validated new and modified manufacturing equipment, laboratory instruments, and manufacturing processes. *** Designed and implemented qualification and test protocols. *** Provided Quality ...

  8. Seeking a Manager, Design Engineer – HIMDE

    Seeking a Manager, Design Engineer – HIMDE Our Client Company is the world leader in the design and manufacture of high-temperature cutting tools (plasma and laser). They are currently seeking a Manager, Design Engineer in Hanover, NH. The salary is $115k - $120k, depending upon experience, plus an average of 20% profit sharing. Relocation assistance is available. The Manager, Design Engineer manages a talented group of machine-design and controls engineers to develop custom-automation solutions ...

  9. QA Engineer (Defense Manufacturing)

    Must have “hands on” direct working experience in Military, Defense Electronics Manufacturing environment. Job functions / Duties & Responsibilities: Process requirements review , CCB, FAI, Test Description: verification of product/process conformance and customer satisfaction by providing entry level technical expertise and leadership for executing product assurance engineering activities throughout the project life-cycle. Plan, document and implement the process and product Quality Assurance ...

  10. Business Development Manager

    Business Development Manager   Overview KMC Systems, a wholly-owned subsidiary of and co-located with Elbit Systems of America, is a leading contract designer and manufacturer of medical devices and instrumentation for OEM’s in the areas of diagnostic, therapeutic, and biomedical products. With more than 25 years of experience, KMC is an ISO 13485 certified and FDA registered firm with expertise in all aspects of product development, verification, design for and transition to production. ...

  11. Engineering Technician

    Seeking an experienced engineering technician to provide advanced support for engineering research projects, engineering development programs, and support of manufacturing transition activities under limited supervision.   You will provide an advanced level of technical assistance with the design, development, construction, and testing of developmental prototype products, transition of pilot products to manufacturing, general electro/mechanical activities, test systems documentation, design, ...

  12. Senior Electrical Engineer

    This is an experienced level position where the incumbent must possess an advanced level of engineering knowledge, and be fully competent in all conventional aspects of broad areas of technical assignment.   Technical tasks at this level are in areas where technical requirements are understood, but design implementations is not defined, are of substantial complexity, and involve the development of new improved techniques and procedures.  Project assignments may require the planning, scheduling and ...

  13. CNC Manufacturing Engineer - Programming Optimization - Nashua, NH

    Opportunity for an up and coming engineer with a CNC programming background to move into an independant leadership role. Shall: *** Lead creation and implementation of CNC Programming for optimizing tooling, machine processes, and new tool platforms. *** Ensure optimal speeds, feeds, tooling and operating sequences as needed *** Develop continuous improvement strategies for manufacturing processes *** Utilize skills in CAD/CAM software including reverse engineering, model manipulation, ...

  14. Sr. Process Engineer

    The Sr. Process Engineer is responsible for the design and development of extrusion processes and products, This is a hands-on position which will provide key technical support throughout the Operation. This person will also take a leadership role in engineering functions such as specifying and validating new equipment and materials, troubleshooting processes, identifying and implementing process/product improvements. The engineer will work with cross-functional teams to monitor and improve yields, ...

  15. Project Manager - Medical Device Molding - Salem, NH

    Custom molder of Medical Devices seeks Project Manager solid track record of successfull projects who can meet with customers and translate their needs into viable components used in Blood Pumps, Insulin Pumps, Needle-Less Syringes, Orthodontics, Dialysis and more. Shall: *** Meet with customers, determine performance requirements of product. *** Determine the physical properties needed to achieve the desired performance requirements. *** Determine if the material choices need to meet ...

  16. Product Manager- Dewatering , Regional- Pulp & Paper Industry

    GL&V USA- Pulp & Paper division- is seeking a full-time experienced Product Manager who is knowledgeable of dewatering technology equipment.This role is responsible for the development, implementation and execution of marketing plans on both the aftermarket and capital equipment product line. Duties include: Expanding the product line business by collaborating with sales, field services, customer service repair/rebuild, supply chain, inventory, stockroom, manufacturing and engineering resources ...