eBay Classifieds » All ads » For sale » Business & industrial » 

lathe in New Hampshire

(0 ad found)

Categories
Price [clear]
$ to

Sorry, but no ads matched your search for "lathe" in your area.

Be the first to get new results like these -

Can't find what you are looking for in your area? See more ads from nearby cities.

  1. 1997 Haas HL-4 CNC Lathe * Nice Clean Machine!

    1997 Haas HL-4 CNC Lathe Specifications: Control Haas X-Axis Travel 11.3" Z-Axis Travel 34" Rapid Traverse Rates 710 ipm Chuck Size 10" Max Bar Capacity 2.5" Max Turning Dia 14.5” Max Turning Length 34" Spindle Speeds 3,400 rpm Spindle Motor 30 hp. Draw Tube Bore 3" Turret ...

  2. 1989 OKUMA LB-15 CNC LATHE

    1989 OKUMA LB-15 CNC LATHE (3 Machines Available) EQUIPPED WITH: 10" CHUCK - 3 JAW A2-6" SPINDLE NOSE 2" SPINDLE BORE OSP 5000 CONTROL 20.47" CENTERS RAPID TRAVERSE 472" TRAVEL X / Z 9.01"/26.38" 12 POSITION TOOL TURRET TAILSTOCK CHIP CONVEYOR 6.89" MAXIMUM CUTTING ...

  3. Gisholt 5L Turret Lathe

    Gisholt 5L Turret Lathe Specifications: 40" Swing Over Bed Ways 33" Swing Over Carriage Wing 26" Swing Over Cross Slide Carriage 100" Center Distance ...

  4. MAZAK SLANT TURN 40 CNC TURNING CENTER * Excellent Machine!

    MAZAK SLANT TURN 40 CNC TURNING CENTER Year: 1987 Specifications: Chuck Size:........................15.0 in Bar Capacity:......................3.15 in # Axis:.................................2 Power:................................40.0 hp RPM:......................... ...

  5. IKEGAI FX20N 2 Axis CNC Lathe With New Fanuc CNC Control * Nice!

    IKEGAI FX20N 2 Axis CNC Lathe The FX20N was built under strict design and manufacturing standards. This machine is extremely accurate and features high speed cutting capability. Bi-directional indexing can be programmed to shorten non-cutting time. The super-precision main ...

  6. MORI SEIKI SL-2 CNC LATHE TURNING CENTER* SUPER CLEAN!

    MORI SEIKI SL-2 CNC LATHE TURNING CENTER MODEL: SL-2 *MACHINE IS "SUPER CLEAN" WITH MINIMAL USE - NOTICE NO WEAR MARKS ON THE CNC CONYROL PANEL! SPECIFICATIONS: SWING OVER BED: 22.4” SWING OVER FRONT COVER: 15.7 ...

  7. 2007 Haas SL-10B Big Bore CNC Lathe * Low Hours * Excellent Machine!

    2007 Haas SL-10B Big Bore CNC Lathe Specifications: Swing Over Bed: 16.25" Maximum Bar Capacity: 2.00" Between Centers: 16.50" Maximum Cutting Diameter: 11.00 Maximum ...

  8. 48"/39" X 160" TUDA  "JUMBO"  GAP BED ENGINE LATHE

    48"/39" X 160" TUDA ENGINE LATHE GENERAL SPECIFICATIONS: MANUFACTURER: TUDA MODEL: JUMBO 1250/4000 NEW: 1982 SWING OVER WAYS: 48" SWING OVER CROSS SLIDE: 39" SWING IN GAP: 68" CHUCK SIZE: 39" WIDTH OF GAP: 30" CENTER DISTANCE: 160" RPM RANGE: 6 - 590 EQUIPPED ...

  9. 1998 Clausing Metosa EL2087CS (CNC Engine Lathe)

    1998 Clausing Metosa EL2087CS CNC Engine Lathe Control: Fagor 800T Swing Over Bed: 20.875" Swing In Gap: 30.75" Swing Over Cross Slide: 12.75" Distance Between Centers: 87" Spindle Nose: D1-8 Spindle Speeds: 0-1,700 RPM Spindle Motor: 10 HP Spindle Bore: ...

  10. HARDINGE MODEL HLV-H-EM PRECISION TOOLROOM LATHE

    HARDINGE MODEL HLV-H-EM PRECISION TOOLROOM LATHE NEW 1982 SPECIFICATIONS: SWING OVER BED: 11" SWING OVER CARRIAGE EDGE: 9" SWING OVER CROSS SLIDE: ...

  11. 1996 Citizen CINCOM M20 (CNC Swiss Type Lathe)

    1996 Citizen CINCOM M20 CNC Swiss Type Lathe CNC Control: Mitsubishi Meldas 530LHC Max. Machining Diameter: .787" (20mm) Max. Machining Length per Chucking: 12.6" Main Spindle Indexing: Full "C" Axis Sub Spindle Indexing: 15 degree Spindle Speeds (Main Spindle Drive ...

  12. Heavy duty Logan 6520 metal lath 14"

    This Logan 6520 metal lathe is a rugged unit made to perform heavy cutting and forming jobs. Has new motor and is in need of one small gear (see pic). Used regularly until gear stripped some teeth. Weighs approx. 1700 lbs. Closed my construction company and am selling off ...

  13. 1943 Bullard SPIRAL DRIVE 36 (Manual Vertical Turret Lathe)

    1943 Bullard SPIRAL DRIVE 36 Manual Vertical Turret Lathe Table Size: 36" 4 Jaw Height Under Rail: 26" Table Speed 10 To 200 Rpm Feeds: .002 To .500 I.P.R. Main Motor: 20 HP Turret Head Travel Left To Right 21" Turret Ram Head Turret Travel Up & Down: 27" ...

  14. Cincinnati HYDROSHIFT 19X54 (Manual Engine Lathe)

    Cincinnati HYDROSHIFT 19X54 Manual Engine Lathe Swing Over Ways: 19" Swing Over Cross Slide: 11.5" Distance Between Centers: 54" Spindle Hole: 1.750" Spindle Taper: L-1 Spindle Speeds (12): 15-1,470 RPM Cross Slide Travle: 12" Top Slide Travel: 3.250" ...

  15. 1953 Jones & Lamson 7A (Manual Turret Lathe)

    1953 Jones & Lamson 7A Manual Turret Lathe Swing Over Bed: 21" Swing Over Cross Slide: 13" Max Turning Length: 37" Spindle Bore: 3" Bar Capacity: 2.5" Spindle Nose: A1-8 Spindle Speed: 1,500 RPM Number of Turret Stations: 6 More Info: http://2spade.com ...

  16. 1981 Leblond 24" REGAL 9" HOLLOW SPINDLE (Oil Country Engine Lathe)

    1981 Leblond 24" REGAL 9" HOLLOW SPINDLE Oil Country Type Engine Lathe Swing Over Bed: 24" Distance Between Centers: 135" Spindle Bore: 9" Spindle Motor: 20 HP Chuck(s) Diameter: 24" -EQUIPPED WITH- Double Chuck on Headstock Taper Attachment Newall DRO ...

  17. 1978 Lodge & Shipley 3220 WHD POWER TURN (Oil Country Engine Lathe)

    1978 Lodge & Shipley 3220 WHD POWER TURN Oil Country Type Engine Lathe Swing Over Bed: 32" Distance Between Centers: 200" Spindle Bore: 12.5" Spindle Motor: 50 HP -EQUIPPED WITH- Double Chuck System Eurotherm DC Drive Taper Attachment Newall DRO ** ...

  18. Logan 6560 heavy duty metal lath

    This Logan 6560 metal lathe is a rugged unit made to perform heavy cutting and forming jobs. Has new motor and is in need of one small gear (see pic). Used regularly until gear stripped some teeth. Weighs approx. 1700 lbs. Closed my construction company and am selling off ...

  19. 1951 Bullard CUTMASTER 42 (Vertical Turret Lathe)

    1951 Bullard CUTMASTER 42 Vertical Turret Lathe Table Diameter: 42" Max Swing With Side Head Down: 54" Max Swing With Side Head Up: 45" Vertical Travel of Turret: 30-3/8" Vertical Travel of Side Head: 37-1/4" Max Height Under Rail: 37" Max Height Under Turret Head: ...

  20. 1941 American 24X240 (Manual Engine Lathe)

    1941 American 24X240 Manual Engine Lathe Swing Over Bed: 24" Distance Between Centers: 240" Spindle Bore: 2" Spindle Motor: 25 HP Spindle Speed: 11-450 RPM -EQUIPPED WITH- 4-Jaw Chuck Steady Rest More Info: http://2spade.com/1941American24X240.html

  21. Ex-Cell-O X-1100 (CNC Vertical Turret Lathe)

    Ex-Cell-O X-1100 CNC Vertical Turret Lathe Control: Fagor 8055 Table (Chuck) Diameter: 30" Swing: 42" Table Motor: 100 HP Max. Workpiece Height: 28" Number of Turret Stations: 6 Tools Tool Holder Taper: ISO-50 Machine Dimensions: 134"L x 100"W x 136"H ...

  22. 1942 Axelson A 32 (Manual Engine Lathe)

    1942 Axelson A 32 Manual Engine Lathe Max Swing Over Bed: 32.5" Distance Between Centers: 432" Bed Length: 504" Spindle Motor: 25 HP -EQUIPPED WITH- 28" Chuck 4 Steady Rests Tailstock More Info: http://2spade.com/1942AxelsonA32.html

  23. 1968 Binns & Berry TB 12.5 (Engine Lathe)

    1968 Binns & Berry TB 12.5 Manual Engine Lathe Serial Number: 9385 Swing Over Ways: 25" Swing Over Cross: 21" Distance Between Centers: 252" Spindle Bore: 4" -EQUIPPED WITH- Taper Attachment Steady Rests More Info: http://2spade.com/1968Binns&BerryTB125.html

  24. 18"/27" x 60" MAZAK GAP BED GEARED HEAD LATHE

    18"/27" x 60" MAZAK GAP BED GEARED HEAD LATHE SPECIFICATIONS: Swing over Bed-................. 18" Swing in Gap-................... 27" Swing over Cross Slide-......... 10" Center Distance-................ 60" Spindle Bore-................... 3 1/8" Spindle Mount-.......... ...

Be the first to get new results like these -