eBay Classifieds » All ads » For sale » 

cnc lathe in New Hampshire

(0 ad found)

Categories
Price [clear]
$ to
      Ads

      Sorry, but no ads matched your search for "cnc lathe" in your area.

      Be the first to get new results like these -

      Can't find what you are looking for in your area? See more ads from nearby cities.

      1. 2013 Hardinge Super-Precision Quest CHNC 42 CNC Lathe * MINT!

        ***VIDEO AVAILABLE*** MACHINE#RES2013 SPECIFICATIONS: Bar Capacity 1.625” Chuck Size 6” Max. Swing 17.94" Tool Variation on Diameter .0002” Spindle Speed 5,000 RPM Spindle Motor 10 HP Spindle Nose A2-5 Tool Stations 12 X-Axis Travel 12.24” Z-Axis Travel 12.25” Approx. Weight 5,220 lbs. Equipped with: Fanuc 32i CNC Control Barfeed Interface Chip Conveyor Chip Conveyor ...

      2. 2000 ROMI G20 CNC LATHE * TOOLING * PARTS CATCHER * NICE!

        2000 ROMI G20 CNC LATHE Specifications: MAX. SWING OVER COVER 17.3" MAX. CUTTING DIAMETER 11" MAX. CUTTING LENGTH 21.2" SPINDLE NOSE A2-6 MAX. BAR CAPACITY 1-1/2" SPINDLE SPEED 45 - 4500 RPM RAPID TRAVERSE X-AXIS 708 IPM RAPID TRAVERSE Z-AXIS 945 IPM TAILSTOCK BODY TRAVEL 12.4" TAILSTOCK QUILL TRAVEL 5.1" TAILSTOCK QUILL DIAMETER 3.1" TAILSTOCK TAPER MT#4 APPROX. MACHINE WEIGHT 10,000 LBS. ...

      3. Hardinge CHNC-I Super Precision CNC Lathe with Fanuc Control * $8500!!

        SPECIFICATIONS: Swing over bed: 14” Maximum Turning Diameter: 8” Maximum Fixture Diameter: 9” X-Axis Travel: 4.5” Y-Axis Travel: 12” Rapid Traverse (X-Axis): 200 IPM Rapid Traverse (Z-Axis): 400 IPM Spindle Nose: A2-5” Spindle Bore: 1.875” Maximum Bar Capacity: 1.625” Spindle Speed: 50-5,000 RPM Spindle Motor: 10 HP Tool Capacity: 8 Stations Tool Change Time: 1-2 seconds Weight: 8000 lbs. ...

      4. 2004  Romi M27 CNC Flat Bed Lathe * Fanuc Control * EXCELLENT!

        2004 Romi M27 CNC Flat Bed Lathe SPECIFICATIONS: Swing Over Bed...........................................................27" Swing Over Cross-slide...............................................16.9” Center Distance...........................................................80" Hole Thru Spindle........................................................6.37" 2-Axis 2 - 1000 rpm 30 HP Motor ...

      5. 2006 Romi M 20 (CNC Tool Room Lathe)

        2006 Romi M 20 CNC Tool Room Lathe Control: Fanuc 21i-T Swing Over Bed: 20" Swing Over Cross: 10" Centers Distance: 62" x Axis Travel: 11" z Axis Travel: 60" Spindle Hole: 2.5" Spindle Nose: A2-6 Spindle Speeds: 2,200 RPM Spindle Motor: 15 HP Number of Turret Postions: 8 Electrics: 230 V, 3 PH, 50/60 HZ Approx Dimensions: 143"L x 65"W x 65"H Machine Weight: 7,750 LBS ...

      6. 2012 Doosan PUMA VTS1214M (CNC Vertical Turret Lathe)

        2012 Doosan PUMA VTS1214M CNC Vertical Turret Lathe Control: Fanuc 32iTA Max Swing: 55.12" Chuck Diameter: 40" Ram Stroke (Z Axis): 31.5" Spindle Speed (2 Speed Gear Box): 630 RPM Spindle Motor: 80 HP C-Axis Minimum Indexing Increment: .001 DEG Cross Rail Elevation (5.9" X 4 Steps): 23.62" Number of Turret Stations: 5 Turn Tool Capcity: 15 ATC Number of Milling ...

      7. 2008 Haas TL 3B (CNC Engine Lathe)

        2008 Haas TL 3B CNC Engine Lathe Control: Haas Swing over front apron: 30" Swing over cross slide: 18.5" Max cutting diameter: 30" Max cutting length: 60" Spindle nose: A2-15 Spindle bore: 8.5" Spindle speed: 650 RPM Spindle motor: 30 HP X-axis travel: 16" Z-axis travel: 60" X-axis rapids: 75 ipm Z-axis rapids: 150 ipm -EQUIPPED WITH- Tool Post Tailstock IPS Option 25” 3-Jaw Chuck w/8.5” ...

      8. 2008 SMTCL Model HTC125490A 49" x 196" 2 Axis Flat Bed CNC Lathe

        SPECIFICATIONS: Swing Over Bed: 49" Max Cutting Length: 192.9" Distace Between Centers: 196.8" Max Swing Over Cross Slide: 32.2" Maximum Cutting Diameter:: 49.2" Type Of Spindle Nose: A2-15 Inner Taper Of Spindle Nose: Metric 140 Spindle Bore: 5.1" ...

      9. 1995 Bridgeport EZ-Path CNC lathe * EXCELLENT LATHE!

        1995 Bridgeport EZ-Path CNC lathe *Excellent Running & Appearance!* Equipped With: 8" buck adjust-true chuck live center 4 Way Tool-post PRICE: $16,500.00 IN EXCELLENT CONDITION! LOCATION: MA

      10. 1993 Okuma LB-25 CNC Lathe * No Tailstock * 1 Owner * Runs Good!

        1993 Okuma LB-25 CNC Lathe Specifications: Swing Over Bed: 24.41" Max Turning Diameter: 14.2" Max Turning Length: 25.6" Hole Thru Spindle: 3.15" Bar Capacity: 2.79" Max Spindle Speed (RPM): 3000 Tool Probe Chip Conveyor 10" POWER CHUCK Control: OSP5020L with NEW Color LCD 30 HP Dual Speed Spindle ***Please note: NO TAILSTOCK*** Price: $25,000.00 In Good Condition! Location: MA

      11. Mori Seiki TL5A CNC Lathe * ONLY $20K!!!

        Mori Seiki TL5A CNC Lathe Catalog Specs: Chuck Size 12" Max Diameter Bar Capacity 3" Max Swing Over Bed / Carriage 20.4" / 14.9" Max Turning Diameter 11" Distance Between Centers 82" Spindle Speed 17 - 2000 RPM Spindle Bore 3.03 Spindle Nose A2-8 Spindle Motor 25 / 20 HP Tools 8 ...

      12. 2008 Haas TL 3 (CNC Engine Lathe)

        2008 Haas TL 3 CNC Engine Lathe Control: Haas Swing Over Bed: 20" Swing Over Cross Slide: 13" Distance Between Centers: 60" Max Cutting Diameter: 20" X Axis Travel: 12" Z Axis Travel: 60" Spindle Nose: A2-6 Spindle Bore: 3.5" Spindle Speed: 1,800 RPM Spindle Motor: 18 HP Machine Dimensions: 123"L x 77"W x 87"H Machine Weight: 7,000 LBS More Info: http://2spade.com/2008HaasTL3.html

      13. 2000 Mazak M5 CNC Flat Bed Lathe

        ***VIDEO AVAILABLE*** SPECIFICATIONS: Two Chuck Size 22" Max Diameter Bar Capacity 7.1" Max Swing Over Bed / Carriage 24" / 13" Max Turning Diameter 13.75" Distance Between Centers 81.9" Spindle Motor 30 / 25 HP AC Spindle Speed 2 - 1000 RPM Spindle Bore 7.1" Spindle Nose A2-15 Spindle Torque 868 ft. lbs. Tools 8 Front OD + 6 Rear ID Rapid Traverse Rates (X & Z) 394 IPM X-Axis ...

      14. GRAY 60" RINGMASTER VERTICAL TURRET LATHE * LIKE NEW!

        ***MACHINE COMPLETELY REMANUFACTURED AND RETROFIT IN 2005 BY DANILUK CORP. COMES FROM U.S. AIR FORCE SURPLUS AND SHOWS LIKE NEW! ***VIDEO AVAILABLE*** SPECIFICATIONS: TABLE DIAMETER: 60" (4-JAW CHUCK) MAXIMUM SWING: 68" MAXIMUM HEIGHT UNDER RAIL: 60" MAXIMUM HEIGHT UNDER RAM TOOL BLOCK: 54" VERTICAL RAM TRAVEL BELOW CROSS RAIL: 36" SMALLEST HOLE RAM AND TOOL BLOCK WILL ENTER: 11" ...

      15. 2006 Haas TL-3 CNC Toolroom Lathe * Like New!  Less Than 2000 Hours!

        2006 Haas TL-3 CNC Toolroom Lathe * Beautiful Machine! Pristine Machine With**1965 Spindle Hours on 2/14/2014**!!!!!!! Specification: Control Haas 32bit CNC Chuck Size 12" Max Swing 20" Max Swing Over Cross Slide 13" Max Between Centers 60" Max Cutting Length 60" X-Axis Travel 12" Z-Axis Travel 60" Max Spindle Speed 1800 RPM Spindle Nose A2-6 Spindle Bore 3.50" Rapids X/Z 75 IPM/ 150 IPM ...

      16. Toolmex Model TUR-630AMN/118 * 2 Axis Flat Bed 24" x 120" CNC Lathe

        NEW 2010 *Front and Rear Chucks* SPECIFICATIONS: Swing Over Bed: 24" Swing Over Cross Slide: 14.6" Distance Between Centers: 120" Spindle Bore: 5.5" Spindle Speeds (21): 15-1400 RPM Motor: 20 HP Tool ...

      17. Mazak QT-35N-U CNC Turning Center * Very Nice CNC Lathe for Your Shop!

        Mazak QT-35N-U CNC Turning Center Specifications: Swing over bed: 20.08" Max. turning dia.: 15.75" Max. machining length: 41.02" Chuck: 8" collet Spindle speeds: 30 - 3000 RPM Spindle motor: 40 / 30 HP Tailstock taper: MT 5 Equipped with: Mazatrol T32 CNC control 12 position tool turret 8" collet chuck with 3" bar capacity Price: $24,500.00 In Very Good Condition Prior To Removal.

      18. 2012 Haas TL-3B Big Bore CNC Flat Bed Lathe In Excellent Condition!

        Specifications: Chuck Size: (2) 25" Manual Chucks Max. Swing Over Bed/Cross Slide 30" / 18.5" Max. Cutting Diameter 30" Max. Machining Length 60" X-Axis Travel 16" Z-Axis Travel 60" Spindle Motor 30 HP Spindle Speed-2 speed Geared 650 RPM Spindle Nose / Spindle Bore A2-15" / 8.5" Turret Type-optional Tool Post Rapid Traverse Rates X / Z 75 IPM / 150 IPM Tailstock Center - Optional: ...

      19. 2005 Sunfirm CST-4280-14A (CNC Hollow Spindle Lathe)

        2005 Sunfirm CST-4280-14A CNC Hollow Spindle Lathe Control: Fanuc 0iTC Swing Over Bed: 42" Swing in Gap: 55" Distance Between Centers: 80" Spindle Speed: 350 RPM Spindle Bore: 14" Spindle Motor: 35 HP Number Of Turret Positions: 8 -EQUIPPED WITH- (1) 24.5" 4-Jaw 12.5" Bore Chuck (front) (1) 25.5" 4-Jaw 14.0" Bore Chuck (rear) Remote Pluse Generator Chip Conveyor More Info: http://2spade ...

      20. MORI SEIKI SL-600C/1000 * 2 Axis CNC Oil Country Lathe With Dual Chuck

        ***HEAVY DUTY CNC OIL COUNTRY LATHE WITH 27" FRONT & REAR AIR CHUCKS*** SPECIFICATIONS: Maximum swing over bed...................................................40.55" Maximum swing over cross slide........................................28.85" Maximum turning diameter.................................................35.43" Maximum turning length............................................... ...

      21. 1976 Sundstrand V12 (CNC Vertical Turret Lathe)

        1976 Sundstrand V12 CNC Vertical Turret Lathe Control: Fanuc 18-T Maximum Swing: 63" Maximum Turning Diameter: 55" Height Under Rail: 41.5" Vertical Ram Travel: 31" Horizontal Rail Travel: 37" Travel Below Saddle: 22" Rapids: 300 IPM Cross Rail Motor: 5 HP Table Motor: 50 HP Table Speed: 3.3 - 295 RPM -EQUIPPED WITH- 46"Table Mounted With 60" Faceplate 5 Station Turret Table Guards ** ...

      22. 2006 Doosan S700 CNC Slant Bed Lathe

        Specifications: Swing Over Bed 35.82", (910 MM) Distance Between Centers 72.83" Maximum Turning Diameter 27.56", (700 MM) Maximum Turning Length 68", (1727 MM) ...

      23. 2004 Romi CNC Lathe Model M27 In Excellent Condition! * Perfect Ways!

        2004 Romi CNC Lathe Model M27 In Excellent Condition! ***WAYS ARE BEAUTIFUL*** SPECIFICATIONS: Swing Over Bed: 27" Swing Over Crosslide: 16.9” Center Distance: 80" Hole Thru Spindle 6.37" 2-Axis 2 - 1000 rpm 30 hp EQUIPPED WITH: Fanuc 21i-T Control 15" 3-Jaw Chuck Steady Rest Tailstock 4-Way Tool Post Chip Conveyor PRICE: $44,500.00 F.O.B. CO IN EXCELLENT CONDITION!

      24. 1996 Clausing Colchester Electronic 22"/31" x 40" CNC Teach Lathe

        1996 Clausing Colchester Electronic 22"/31" x 40" CNC Teach Lathe Model No. Mastiff ***VIDEO AVAILABLE*** ***MACHINE IS LIGHTLY USED IN EXCELLENT CONDITION!*** SPECIFICATIONS: Swing Over Bed Ways: 22" Swing in Gap: 31" Swing Over Cross Slide: 14-1/2" Distance Between Centers: 40" Spindle Nose: D1-11" Spindle Bore: 3-1/2" Spindle Speeds: 16 to 1800 RPM (Constant Surface Speed) Motor: 15 ...

      Be the first to get new results like these -