eBay Classifieds  » For sale » 0 ads for lathe in New Hampshire

Can't find what you are looking for in your area? See more ads from nearby cities.

1. 
   1943 Bullard SPIRAL DRIVE 36 (Manual Vertical Turret Lathe)

   Please Contact

   1943 Bullard SPIRAL DRIVE 36 Manual Vertical Turret Lathe Table Size: 36" 4 Jaw Height Under Rail: 26" Table Speed 10 To 200 Rpm Feeds: .002 To .500 I.P.R. Main Motor: 20 HP Turret Head Travel Left To Right 21" Turret Ram Head Turret Travel Up & Down: 27" Turret Head Position: 5 Turret Head Swivel: Yes More Info: http://2spade.com/1943BullardSPIRALDRIVE36.html

   Jun 18 - Brattleboro : Bellows Falls - Business & industrial

2. 
   Mori-Seiki MH-1500G Gap Bed Engine Lathe 24"/33-3/8" x 60" * Nice!

   $15,900

   Mori-Seiki MH-1500G Gap Bed Engine Lathe 24"/33-3/8" x 60" SPECIFICATIONS: Swing over bed: 24" Swing over removeable gap: 33-3/8" Swing over cross slide: 16" Swing over bed to 6" from faceplate: 26-5/8" Distance center to center: 60" Spndle nose: D-1-8" camlock Spindle bore: 3" (77 mm) Feeds, longitudinal: (32) .0028" - .0393" IPR Feeds, cross: (32) .0029" - .0424" IPR Inch threads: 80 - 4 TPI Metric theads: 0.5 - 7mm pitch DP threads: 112 - 8 Module threads: 0.5 - 3.5 Cross ...

   Jun 18 - Worcester : Worcester - Business & industrial

3. 
   Mori-Seiki MH-2000 Engine Lathe 24" x 80" * Very Good Lathe!

   $17,900

   Mori-Seiki MH-2000 Engine Lathe 24" x 80" SPECIFICATIONS: Swing over bed: 24" Swing over cross slide: 16" Swing over bed to 6" from faceplate: 26-5/8" Distance center to center: 80" Spndle nose: D-1-8" camlock Spindle bore: 3" (77 mm) Feeds, longitudinal: (32) .0028" - .0393" IPR Feeds, cross: (32) .0029" - .0424" IPR Inch threads: 80 - 4 TPI Metric theads: 0.5 - 7mm pitch DP threads: 112 - 8 Module threads: 0.5 - 3.5 Cross slide travel: 13-1/2" Compound rest travel: 6-5/8" ...

   Jun 18 - Worcester : Worcester - Business & industrial

4. 
   VINTAGE DECOR LATHE PAINTED WOODEN CIGARETTE LIGHTER

   $6

   VINTAGE DECOR LATHE PAINTED WOODEN CIGARETTE LIGHTER THE FLINT AND WICK APPEAR TO BE OK NEEDS FLUID THERE ARE A FEW PAINT CHIPS ALONG TOP AND NEAR BOTTOM. THE LIGHTER CAN BE REMOVED FROM TOP BY JUST PULLING IT UP. FAIR CONDITION SIZE: 5” X 11 ¾” SHIPPING WEIGHT: 4 LBS.

   Jun 16 - Hudson Valley : Woodridge - Home decor

5. 
   2004 Haas TL-2 (CNC Tool Room Lathe)

   Please Contact

   2004 Haas TL-2 CNC Tool Room Lathe Control: Haas Swing Over Ways: 19" Swing Over Cross Slide: 11.1" Max Cutting Diameter: 16" Centers Distance: 48" Spindle Nose: A2-6 Spindle Bore: 3" Spindle Speed: 1,800 RPM Spindle Motor: 12 HP Tailstock Taper: MT#4 Tailstock Stroke: 33.5" Machine Dimensions: 101"L x 55"W x 78"H Machine Weight: 5,000 LBS More Info: http://2spade.com/2004HaasTL2.html

   Jun 11 - Brattleboro : Bellows Falls - Business & industrial

6. 
   2000 Eurotech 730 SL-Y (CNC Multi Axis Lathe)

   Please Contact

   2000 Eurotech 730 SL-Y CNC Multi Axis Turning Center Control: Fanuc 18i-T Bar Capacity: 2.625" Max. Mach. Dia: 9.842" Max. mach. length: 19.685" Max. Swing: 20.472" Main Spindle Speed: 4000 RPM Main Spindle Nose: A2-6 Main Spindle Motor HP: 30 HP Sub Spindle Speed: 4000 RPM Sub Spindle Nose: A2-5 Sub I.D. drawtube: 1.692" Sub Spindle Motor: 7 HP No. of Turret Stations: 12 Live Tool Turret Positions: 12 Live Tool Speeds: 3000 RPM Live Tool Motor: 5 HP Total Machine Dimensions: L158 ...

   Jun 7 - Brattleboro : Bellows Falls - Business & industrial

7. 
   John Lang 44x100

   Please Contact

   John Lang 44x100 Engine Lathe Swing Over Ways: 44" Distance Between Centers: 100" Spindle Speeds: 13~380 RPM Spindle Bore: 4.5" Main Motor: 30 HP Chuck Diameter: 40" (4 Jaw) -EQUIPPED WITH- 40" 4-Jaw Chuck Spare Chuck Steady Rest Inch/Metric Threading Tool Post More Info: http://2spade.com/JohnLang44x100.html

   Jun 7 - Brattleboro : Bellows Falls - Business & industrial

8. 
   bear auto brake lathe with bench and adapters

   $800

   have a bear automotive brake lathe for sale. Works good. comes with bench and adapters for turning rotors and drums on cars and light trucks.

   Jun 7 - Norwich : Thompson - Tools

9. 
   2007 Okuma Heritage ES-L10 CNC Turning Center In Excellent Condition!

   $65,000

   2007 Okuma Heritage Lathe Model ES-L10 In Excellent Condition! One owner machine is under the power cutting chips with low hours! Very clean machine Ready to inspect. Machine Description: 2007 Okuma HERITAGE ES-L10 Swing Over Covers: 21.65" Swing Over Cross Slide: 20.47" Maximum Turning Diameter: 12.20" Maximum Turning Length: 19.68" Travels -- X-Axis: 8.10" - Z-Axis: 20.47" Rapid Traverse Rate -- X-Axis: 787" / Min. - Z-Axis: 984" / Min. Spindle Nose Type: JIS A2-8" Spindle Bore: 3.15" ...

   Jun 6 - Worcester : Worcester - Business & industrial

10. 
    Bardons and Oliver No. 3 Universal Turret Lathe * Fully Operational!!

    $3,000

    Bardons and Oliver No. 3 Universal Turret Lathe. Fully operational and comes with tons of extras. 1 three-jaw chuck and 1 4-jaw chuck. Also has an assortment of collets. Weighs about 4000 lbs. Price: $3000.00 Plus Rigging & Freight

    Jun 6 - Worcester : Worcester - Business & industrial

11. 
    Jones & Lamson #8A Turret Lathe for $5000.00!!!

    $5,000

    Jones & Lamson #8A Turret Lathe. 12" chuck, 3" thru hole. Comes with ALL the collets up to 3" Saddle type turret lathe. 36" turning length, 12' overall length. Machine is fully functional and in very good condition. $5000.00 plus rigging & freight.

    Jun 6 - Worcester : Worcester - Business & industrial

12. 
    1944 Axelson 25X180 (Heavy Duty Engine Lathe)

    Please Contact

    1944 Axelson 25X180 Heavy Duty Engine Lathe Swing: 25" Swing Over Cross: 18" Distance Between Centers: 180" Spindle Bore: 4-1/8" Spindle Speed: 555 RPM Spindle Motor: 20 HP Equipped With- 21" Chuck (4) steady rests ranging from (9" to 20")

    Jun 5 - Brattleboro : Bellows Falls - Business & industrial

13. 
    1995 Citizen CINCOM F12 (CNC Swiss Lathe, Twin Turret)

    Please Contact

    1995 Citizen CINCOM F12 CNC Swiss Lathe, Twin Turret Control: Fanuc OT Max Turning Diameter: 12MM (.472") Max Chucking Length: 125MM (4.921") Number of Tool Stations: 10 Spindle Speeds: 220 - 10,000 RPM Spindle Motor: 5 HP Rotary Tool Spindle Speeds: 200 - 3,000 RPM(low), 1,000 - 6,400 RPM (high) Maximum Drilling Diameter: 8MM (.315") Max Tap or Die Diameter: 6MM (.236") Tool Shank Size: 1/2" -EQUIPPED WITH- synchronous Rotary Guide Bushing 360 Degree Main Spindle Indexing SMW Bar ...

    Jun 5 - Brattleboro : Bellows Falls - Business & industrial

14. 
    2006 HAAS SL-30T (CNC TURNING CENTER)

    Please Contact

    2006 HAAS SL-30T CNC TURNING CENTER 20 HP VECTOR DRIVE SPINDLE 10" X 20" MAX. 20" SWING 2” BAR CAPACITY HYBRID TURRET (6)BOLT ON–(6)VDI40 STATIONS 50-4000 RPM 8" HYDRAULIC CHUCK 15” COLOR MONITOR USB PORT 1 MG MEMORY OPTIONS INCLUDED: HYBRID 12 STATION TURRET LATHE TOOL PRESETTER LATHE CHIP AUGER SYSTEM IPS-L INTUITIVE PROGRAMMING SYSTEM PTS20 FULLY PROGRAMMABLE HYDRAULIC TAILSTOCK PARTS CATCHER

    Jun 5 - Brattleboro : Bellows Falls - Business & industrial

15. 
    1989 South Bend 750 Engine Lathe

    Please Contact

    1989 South Bend 750 Engine Lathe Swing Over Ways: 29" Swing Over Cross Slide/Carriage: 16.75" Distance Between Centers: 157" Spindle Speed: 750 RPM Spindle Bore: 4-1/4" Chuck Diameter: 15-1/2" (3 Jaw) Machine Weight: 13,750 LBS -EQUIPPED WITH- Inch/Metric Threading 40"(approx) Swing in Removable Gap(10" Gap Length) 15-1/2 3-Jaw Chuck More Info: http://2spade.com/1989SouthBend750.html

    Jun 5 - Brattleboro : Bellows Falls - Business & industrial

16. 
    2009 Hurco TM8 (CNC Turning Center)

    Please Contact

    2009 Hurco TM8 CNC Turning Center Control: Max Max Swing Over Bed: 21.6" Max Swing Over Carriage: 11.8" Cross Travel (X-Axis): 8" Longitudinal Travel (Z-Axis): 20" Rapid Traverse Rate (X-Axis): 750 IPM Rapid Traverse Rate (Z-Axis): 945 IPM Turret Tool Positions: 10 Total Bar Capacity: 2" Spindle Nose: A2-6 Spindle Speed Range: 4,800 RPM Spindle Horsepower: 22 HP Approximate Machine Dimensions: 116"L x 91"W x 80"H Approximate Machine Weight: 8,160 LBS -EQUIPPED WITH- Lathe Max ...

    Jun 5 - Brattleboro : Bellows Falls - Business & industrial

17. 
    2000 Milltronics ML 15 (CNC Tool Room Lathe)

    Please Contact

    2000 Milltronics ML 15 CNC Tool Room Lathe Control: Centurion 6 Swing Over Bed: 15" Swing Over Cross Slide: 9" Distance Between Centers: 60" Chuck Size: 8" Spindle Nose: D1-6 Spindle Bore: 2.18" Spindle Seed: 3,000 RPM Spindle Motor: 7.5 HP -EQUIPPED WITH- Smart Dex 8-Position Turret More Info: http://2spade.com/2000MilltronicsML15.html

    Jun 5 - Brattleboro : Bellows Falls - Business & industrial

18. 
    Hardinge CHNC-II+ With Fanuc Control & Tooling * Excellent Condition!

    $14,500

    Hardinge CHNC-II+ With Fanuc Control CNC Super Precision Lathe With Flat Top Tool Turret, 5C & 16C Collets, Misc. Turret Tooling - Machine was used very little in a job shop and is in Excellent Condition! Price: $14,500.00!!!!

    Jun 5 - Worcester : Worcester - Business & industrial

19. 
    1941 Bullard SPIRAL DRIVE 42B

    Please Contact

    1941 Bullard SPIRAL DRIVE 42B Vertical Turret Lathe Chuck Diameter: 42" Swing: 48" Height Under Rail: 30" Table Speed: 100 RPM Number of Turret Positions: 5 Turret Travel: 27" Main Motor: 7-1/2 HP More Info: http://2spade.com/1941BullardSpiralDrive42B.html

    Jun 4 - Brattleboro : Bellows Falls - Business & industrial

20. 
    RECONDITION 10 x 28 SOUTH NBEND LATHE- 860 796 0230

    $3,900

    COMES WITH TOOLING CALL 860 796 0230 FOR DETAILS PLEASE ASK FOR WILLARD AT 860 796 0230 AND HE IS THE ONE WHO WILL HELP YOU WITH ANY INFO YOU MAY NEED. THANK YOU.............

    Jun 2 - Central New York : Marathon - Tools

21. 
    1930 Bullard SPIRAL DRIVE 50 (Vertical Turret Lathe)

    Please Contact

    1930 Bullard SPIRAL DRIVE 50 Manual Vertical Turret Lathe Table Size: 50" Number Of Head(s): 2 Maximum Swing: 56" Maximum Height under Rail: 35-1/2" Maximum Height under Turret Face: 48-1/2" Table Speeds: (12) 3.5 to 60 RPM Vertical Turret Head Travel: 27" Horizontal Turret Head Travel: 56" Vertical Side Head Travel: 29" Motor: 25 HP Over All Dimensions: 93" L-R X 115" F-B X 109" High Approximate Weight: 24,500 Lbs. -EQUIPPED WITH- 50" 4-Jaw Chuck 5-Position Turret ...

    Jun 2 - Brattleboro : Bellows Falls - Business & industrial

22. 
    1998 Harrison ALPHA 550 PLUS (CNC Engine Lathe)

    Please Contact

    1998 Harrison ALPHA 550 PLUS CNC Engine Lathe Control: GE Fanuc Swing Over Bed: 22" Swing Over Cross Slide: 14" Maximum Machining Diameter: 14" Distance Between Centers: 120" Spindle Speeds: 15 - 1,800 RPM Spindle Bore: 4.1" Spindle Drive: 15 hp Number of Tool Positions: 4 -EQUIPPED WITH- Tail Stock (2) Steady Rests More Info: http://2spade.com/1998HarrisonALPHA550PLUS.html

    May 29 - Brattleboro : Bellows Falls - Business & industrial

23. 
    Poreba TPK90A1-4000 (Engine Lathe)

    Please Contact

    Poreba TPK90A1-4000 Manual Engine Lathe Swing Over Bed: 36.6" Swing Over Carriage: 24.8" Swing In Gap: 47.2" Distance Between Centers: 157.5" Gap Space: 22.4" Max Workpiece Weight: 19,800 LBS Spindle Speeds: 7-710 RPM Spindle Bore: 3.7" Spindle Motor: 20/30 HP Machine Dimensions: 256"L x 69"W x 56"H Machine Weight: 22,000 LBS -EQUIPPED WITH- Threading (Metric & Inch) TailStock (MT6 Quill Taper) Taper Attachment Steady Rests (2) 24" 3-Jaw Chuck More Info: http://2spade.com ...

    May 29 - Brattleboro : Bellows Falls - Business & industrial

24. 
    1951 Niles FPW 40 (Vertical Turret Lathe)

    Please Contact

    1951 Niles FPW 40 Vertical Turret Lathe Chuck Diameter: 40" Swing Past Side Head: 44" Swing Past Column: 51" Height Under Rail: 36" Table Speeds: 18-200 RPM Main Motor: 30 HP Number of Turret Positions: 5 Equipped With Side Head: Yes More Info: http://2spade.com/1951NilesFPW40.html

    May 29 - Brattleboro : Bellows Falls - Business & industrial