eBay Classifieds » All ads » Jobs » 

soldering in New Hampshire

(1-24 of 28 ads)
View as:
Categories
    Ads
    1. Mechanic A

      1.Can you proficiently drill & tap holes? 2.What does NPT stand for? 3.Can you clean & install NPT fittings? 4.Would you normally use teflon tape or paste type pipe sealant? 5.Can you cut, deburr, thread, pipe? If so, what sizes and material? 6.Can you cut, deburr, assemble, ...

    2. Industrial Electrician

      Major Leading Manufacturing Company Located near Bedford, NH Description : Industrial Electrician EXPERIENCE AND QUALIFICATIONS Experienced in harness assembly to wire prototype machinery. Background with 120 VA control circuits, 3-phase motor starters and 4-20 ma signal ...

    3. Mechanic A

        Mechanic-A Aviation Technology, Inc. – Manchester, NH Experienced in fabricating S/S tubing assemblies, and assembly of hydraulic, mechanical, pneumatic systems using schematics. Must be proficient in drilling and tapping holes. Must be proficient in cleaning & ...

    4. Commercial Plumbers and Apprentices

      Licensed Commercial Plumbers and Apprentices Job Responsibilities Looking for Commercial Plumbers with experience in: The ability to lay out, install, maintain and repair steam, air, water, gas and chilled water lines. Plumbing in lavatories, plant, ground, floor ...

    5. Electro-Mecanchical Assemblers/Solderers

      H.W Staffing is currently recruiting for 1st, 2nd and 5th shift Electro-Mechanical Assembler positions in the Nashua area. Qualified candidates should have the ability to assemble and solder electronic components, sub-assemblies and systems by following specific written ...

    6. Commercial Plumbers and Apprentices

      Licensed Commercial Plumbers and Apprentices Job Responsibilities Looking for Commercial Plumbers with experience in: The ability to lay out, install, maintain and repair steam, air, water, gas and chilled water lines. Plumbing in lavatories, plant, ground, floor ...

    7. Connector Assembler I - entry level

      JOB SUMMARY:  Under general supervision, prepares cable and assembles and solders connector plugs to cables for use in ultrasonic sensors. JOB FUNCTIONS:  While in the performance of job requirements, observes all safety regulations including personal protective equipment ...

    8. Assembler

      Wire/Cable Assembler: INDIVIDUAL WILL MAKE SMALL MEASUREMENTS OF COILING WIRE, CUT A SLIT W/ AN EXACTO KNIFE AND HEAT IT WITH A HEAT GUN. YOU MAY ALSO BE TERMINATING WIRES, CUTTING WIRES AND POKING SLOTS IN WIRE. PERSON WILL SIT ALL DAY; NO HEAVY LIFTING. THEY NEED TO FOLLOW ...

    9. Power Supply Assembler/Solderer (1282)

      We are currently seeking a Power Supply Assembler/Solderer, 2nd shift for our client in Nashua, NH. Position Description Position requires experience in assembly of complex, mixed technology circuit card assemblies, magnetics, cables, modules, and light mechanical ...

    10. RF Assembler	(1224)

      We are currently seeking a RF Assembler, 1st shift for our client in Nashua, NH. Position Description Should be familiar with MIL-STD-883 and J-STD-001 with 7 years manufacturing experience with electro-mechanical assemblies.     Need soldering capabilities to MIL ...

    11. Microwave Assembler (1200)

      We are currently seeking an Microwave Assembler, 2nd shift for our client in Nashua, NH. Position Description Fabricates and/or modifies complex microwave/RF integrated circuit modules and sub-assemblies by following specific instructions. Must be familiar with ...

    12. RF Microwave Assembler (1245)

      We are currently seeking an RF Microwave Assembler, 5th shift for our client in Nashua, NH. Position Description Fabricates and/or modifies complex microwave/RF integrated circuit modules and sub-assemblies by following detailed instructions. Must be familiar with ...

    13. RF Assembler (1225)

      We are currently seeking a RF Assembler, 2nd shift for our client in Nashua, NH. Position Description Should be familiar with MIL-STD-883 and J-STD-001 with 7 years manufacturing experience with electro-mechanical assemblies.     Need soldering capabilities to MIL ...

    14. RF Inspector (1139)

      We are currently seeking an RF Inspector, 5th shift, for Nashua, NH. Responsibilities: Perform MIL Standard 883 and IPC J-STD-001 visual and mechanical inspections on solder and mechanical assemblies and components of Military Hardware utilizing a full range of precision ...

    15. Electronic Assembler Specialist (1066)

      We are currently seeking an Electronic Assembler Specialist, 5th shift for our client in Nashua, NH. Position Description Assembles and solder electronic components, subassemblies and systems by following specific written instructions. Skills Required Assembles, ...

    16. Mechanical Technician 1 (1120)

      We are currently seeking an Mechanical Technician 1, 5th shift for our client in Nashua, NH. Position Description Assembles, disassembles, modifies, reworks and repairs various preproduction and production subassemblies, assemblies and complete electrical and mechanical ...

    17. Welder-Container

      Equal Opportunity Employer: Minority/Female/Disability/Veteran Other Possible Location: N/A Job Schedule: N/A Job Shift: 1st Shift Pay: N/A Travel: None Relocation: N/A Waste Management (WM), a Fortune 250 company, is the leading provider of comprehensive waste and ...

    18. Welder - Container Shop 1st Shift

      Equal Opportunity Employer: Minority/Female/Disability/Veteran Other Possible Location: N/A Job Schedule: N/A Job Shift: 1st Shift Pay: N/A Travel: None Relocation: N/A Waste Management (WM), a Fortune 250 company, is the leading provider of comprehensive waste and ...

    19. Wire/Cable Assemblers

       Our client in Merrimack, NH is in need of assemblers.   Perform various manufacturing function by utilizing tools such as crimpers, heat gun, cutters, etc. on various jobs including, but not limited to; cutting, striping, crimping, poking, assembling, twisting, dipping, ...

    20. Wire/Cable Assembler

      Wire/Cable Assembler: INDIVIDUAL WILL MAKE SMALL MEASUREMENTS OF COILING WIRE, CUT A SLIT W/ AN EXACTO KNIFE AND HEAT IT WITH A HEAT GUN. YOU MAY ALSO BE TERMINATING WIRES, CUTTING WIRES AND POKING SLOTS IN WIRE. PERSON WILL SIT ALL DAY; NO HEAVY LIFTING. THEY NEED TO FOLLOW ...

    21. Electronics/Soldering Technician

        We are looking for a few Electronics/Soldering Technicians for our Dover, NH client.  Monday through Friday- 8am-4:30pm.  Pay is $12-13.50/hr depending on level of experience.  Temp to Perm for successful candidates!  Available IMMEDIATELY!   Qualified candidates will be ...

    22. Laminator I

      JOB SUMMARY: Under close supervision laminates steel or aluminum elements for use in ultrasonic sensors, which requires the use of Aqueous cleaner and sandblaster.  Observes all safety regulations including personal protective equipment applicable to the use of electrical ...

    23. Wire/Cable Assembler

      Wire/Cable Assembler: INDIVIDUAL WILL MAKE SMALL MEASUREMENTS OF COILING WIRE, CUT A SLIT W/ AN EXACTO KNIFE AND HEAT IT WITH A HEAT GUN. YOU MAY ALSO BE TERMINATING WIRES, CUTTING WIRES AND POKING SLOTS IN WIRE. PERSON WILL SIT ALL DAY; NO HEAVY LIFTING. THEY NEED TO FOLLOW ...

    24. Assembler/Solderer

       Our client, an established manufacturer in Hampstead, is searching for an experienced assembler who is comfortable handling very small pieces under a microscope.   You must have good hand/eye coordination and can work with lenses, tweezers and drop gauges.  This is a long ...